Current Updates
Stay informed with regular updates as construction progresses. We’ll keep you posted on project milestones, potential disruptions, and other important details.
Building envelope work continues across the Prince George Campus through early August. Current work includes window replacement, exterior wall upgrades, siding installation, landscaping, painting, roof work, and exterior finishing.
Work is taking place in the 100, 200, 300, 400, 500, and 700 Blocks.
Accessible parking near the Main Entrance has been relocated until further notice to the crosswalk ramp, and a detour is in place for those walking from the east side.
Check the full map to see how campus blocks are connected and where work is taking place.
Expected Impacts:
🔊 Noise: Elevated noise levels may occur from window replacement, concrete work, stucco removal, and exterior wall installation. Predrilling for window replacement in the 200 Block will be especially noisy.
🚧 Access: Temporary barriers, fencing changes, and localized detours may remain in place as work progresses.
👷 Construction Activity: Equipment movement, material deliveries, landscaping, and exterior finishing continue throughout active work zones.
🚪 200 Block Window Replacement: Window replacement is underway on the north side of the second and third floors. Occupants in affected rooms may be contacted directly before work begins.
Please follow posted signage and allow extra time when travelling through construction areas.
Upcoming Activities
July 6 – 12
Sitewide
- Sidewalk replacement (100 and 700 Blocks) 🔊
200 Block
- Window replacement (2nd and 3rd floors) 🚪
- Predrill window dams and angles (elevated noise) 🔊
- Window Replacement Schedule:
- July 9–10: Room 2-244 (FINE ARTS LAB)
- Insulation installation
300 Block South
- New canopy preparation
- Main floor panel installation
- Canopy wood-look installation
300 Block North
- Exterior wall framing
- Insulation installation
300 Block West
- Exterior wall framing
- Waterproof membrane application
400 Block
500 Block
700 Block
- Strip lighting
- Window flashing installation
- Stairwell doors and glazing
- Mechanical penthouse siding
July 13 – 19
100 Block
- Prepare ground for new sod
200 Block
- Window replacement (2nd and 3rd floors) 🚪
- Window Replacement Schedule:
- July 13–14: Room 2-243 (PSYCHOLOGY)
- July 14-15: Room 2-242 (FACULTY OFFICES)
- July 16–17: Room 3-234 (NRFT LAB)
300 Block South
- New canopy preparation
- Main floor panel installation
300 Block North
- Exterior wall framing
- Break out and remove existing stair landing 🔊
300 Block West
- Exterior wall framing
- Waterproof membrane application
- Insulation installation
400 Block
- Exterior wall installation
- Strip lighting framing
500 Block
700 Block
- East entrance vestibule doors
- Main entrance doors
- Mechanical penthouse siding
July 20 - 26
100 Block
- Prepare ground for new sod
200 Block
- Window replacement (2nd and 3rd floors) 🚪
- July 20-21: Room 3-236
- July 21-22: Room 3-238 (MLTS LAB)
300 Block South
300 Block North
300 Block West
- Exterior wall framing
- Waterproof membrane application
- Insulation installation
400 Block
- Exterior wall installation
- Strip lighting framing
500 Block
700 Block
- Main entrance doors
- Mechanical penthouse siding
July 27 - August 2
200 Block
- Window replacement (2nd and 3rd floors) 🚪
- Insulation installation
300 Block South
- Main floor panel installation
300 Block North
300 Block West
400 Block
- Exterior wall installation
- Soffit framing for strip lighting
500 Block
700 Block
- Lower interior corners
- Mechanical penthouse siding
About the Project
The Building Envelope Project is designed to enhance the exterior of the Prince George Campus through energy-efficient upgrades, improved sustainability, and long-term infrastructure renewal. These improvements will help create a more comfortable and resilient campus for students, employees, and visitors.
This project is made possible with restricted capital funding by the Ministry of Infrastructure.
The Building Envelope Project supports CNC’s Strategic Plan (lhulh whuts’odutel’eh – Learning Together) under Priority 3.5: Rejuvenate College Infrastructure. Specifically, it supports objectives 3.5.1 through 3.5.4 by upgrading campus infrastructure, revitalizing learning spaces, improving sustainability, and helping reduce the college’s overall carbon footprint.
Key Highlights of the Project:
- Energy-efficient building upgrades
- Modernized campus exterior
- Improved long-term durability and sustainability
Project Timeline
- March 2025: Project mobilization and site preparation
- May 2025: Construction begins
- Summer–Fall 2025: Demolition and exterior renewal work
- Winter 2025–26: Interior and exterior finishing activities
- Spring 2026: Major exterior upgrades continue across campus
- Estimated Completion: May 2027
Impact on Campus
We are committed to minimizing disruptions during construction. Updates will be provided regarding:
- Campus accessibility
- Temporary disruptions and detours
- Changes to parking, entrances, and pedestrian routes
Our team is focused on ensuring that the impact on your daily experience is as minimal as possible.
Building Envelope Project FAQ
Why does some of the new siding look wavy?
Some members of the campus community may notice slight waviness or “ripples” in portions of the new metal siding. This effect, known as oil canning, is a common characteristic of flat metal siding and is widely recognized across the construction industry.
Oil canning is a visual effect only. It does not affect the strength, safety, durability, or weather protection of the building. The project team continues to monitor installation quality to ensure the work meets project requirements and industry standards.
The effect is often more noticeable in certain lighting and typically becomes less noticeable over time.
Read more about siding appearance
Questions?
construction@cnc.bc.ca